The four diameters
| Symbol | Dimension | What it does |
|---|---|---|
| d1 | Inner ring inside diameter | Sits just outside the pipe bore |
| d2 | Winding inside diameter | Start of the sealing element |
| d3 | Winding outside diameter | End of the sealing element |
| d4 | Centering ring outside diameter | Touches the bolts and centres the gasket |
The tables below give each diameter by nominal pipe size and pressure class.
Thickness
| Part | Thickness |
|---|---|
| Winding, as made | 4.5 mm |
| Winding, compressed in the joint | about 3.3 mm |
| Centering ring and inner ring | about 3 mm |
Other winding thicknesses are made for large diameters and to drawing.
How to use the chart
- Find the flange size (NPS) in the first column.
- Read the column for the flange pressure class.
- For a CG gasket you need d2, d3 and d4. For a CGI gasket add d1.
For flanges above NPS 24 (ASME B16.47 Series A and B), DIN flanges and heat exchangers, send us the flange standard or drawing. See also CG vs CGI, the colour code chart and JaySeal spiral wound gaskets.




