JaySeal® industrial gaskets · Vasai East, Mumbai +91 90821 00050 sales@jaygaskets.com
Request a quote

Reference chart · Spiral wound gasketsSpiral wound gasket dimensions

Spiral wound gasket sizes in millimetres to ASME B16.20 for ASME B16.5 flanges, NPS 1/2 to 24, class 150 to 2500: winding inside and outside diameter, centering ring outside diameter and inner ring inside diameter.

Spiral wound gaskets in a range of diameters

The four diameters

SymbolDimensionWhat it does
d1Inner ring inside diameterSits just outside the pipe bore
d2Winding inside diameterStart of the sealing element
d3Winding outside diameterEnd of the sealing element
d4Centering ring outside diameterTouches the bolts and centres the gasket

The tables below give each diameter by nominal pipe size and pressure class.

Thickness

PartThickness
Winding, as made4.5 mm
Winding, compressed in the jointabout 3.3 mm
Centering ring and inner ringabout 3 mm

Other winding thicknesses are made for large diameters and to drawing.

How to use the chart

  1. Find the flange size (NPS) in the first column.
  2. Read the column for the flange pressure class.
  3. For a CG gasket you need d2, d3 and d4. For a CGI gasket add d1.

For flanges above NPS 24 (ASME B16.47 Series A and B), DIN flanges and heat exchangers, send us the flange standard or drawing. See also CG vs CGI, the colour code chart and JaySeal spiral wound gaskets.

Need a quote? Send size, class, material and quantity to sales@jaygaskets.com or WhatsApp +91 90821 00050.
Dimension chart

Spiral wound gasket sizes (mm).

From the JaySeal catalogue, to ASME B16.20 for ASME B16.5 flanges.

ASME B16.20 dimensions for ASME B16.5 flanges — winding OD and ID (mm)

FlangeWinding OD (d3)Winding ID (d2) by pressure class
NPSClass 150–600Class 900–250015030040060090015002500
1/231.7531.7519.0519.05—19.05—19.0519.05
3/439.6239.6225.4025.40—25.40—25.4025.40
147.7547.7531.7531.75—31.75—31.7531.75
1 1/460.4560.4547.7547.75—47.75—39.6239.62
1 1/269.8569.8554.1054.10—54.10—47.7547.75
285.8585.8569.8569.85—69.85—58.6758.67
2 1/298.5598.5582.5582.55—82.55—69.8569.85
3120.65120.65101.60101.60—101.6095.2592.2092.20
4149.35149.35127.00127.00120.65120.65120.65117.60117.60
5177.80177.80155.70155.70147.57147.57147.57143.00143.00
6209.55209.55182.63182.63174.75174.75174.75171.45171.45
8263.65257.30233.43233.43225.55225.55222.75215.90215.90
10317.50311.15287.27287.27274.57274.57276.35266.70270.00
12374.65368.30339.85339.85327.15327.15323.85323.85317.50
14406.40400.05371.60371.60361.95361.95355.60361.95—
16463.55457.20422.40422.40412.75412.75412.75406.40—
18527.05520.70474.73474.73469.90469.90463.55463.55—
20577.85571.50525.53525.53520.70520.70520.70514.35—
24685.80679.45628.65628.65628.65628.65628.65615.95—

— = not listed in ASME B16.20 for that class (class 400 below 4", class 900 below 3", class 2500 above 12"). OD tolerance: 1/2"–8" ±0.762 mm, 10"–24" +1.524 / −0.762 mm. ID tolerance: 1/2"–8" ±0.406 mm, 10"–24" ±0.762 mm.

Centering (outer) ring OD (d4) by pressure class (mm)

NPS15030040060090015002500
1/247.7554.10—54.10—63.5069.85
3/457.1566.80—66.80—69.8576.20
166.8073.15—73.15—79.5085.85
1 1/476.2082.55—82.55—88.90104.90
1 1/285.8595.25—95.25—98.55117.60
2104.90111.25—111.25—143.00146.05
2 1/2123.95130.30—130.30—165.10168.40
3136.65149.35—149.35168.40174.75196.85
4174.75181.10177.80193.80206.50209.55234.95
5196.85215.90212.85241.30247.65254.00279.40
6222.25250.95247.65266.70289.05282.70317.50
8279.40308.10304.80320.60358.90352.55387.35
10339.85361.95358.90400.05435.10435.10476.25
12409.70422.40419.10457.20498.60520.70549.40
14450.85485.90482.60492.25520.70577.85—
16514.35539.75536.70565.15574.80641.35—
18549.40596.90593.85612.90638.30704.85—
20606.55654.05647.70682.75698.50755.65—
24717.55774.70768.35790.70838.20901.70—

Centering ring OD tolerance ±0.762 mm.

Inner ring ID (d1) by pressure class (mm) — ASME B16.20

NPS15030040060090015002500
1/214.2214.22—14.22—14.2214.22
3/420.5720.57—20.57—20.5720.57
126.9226.92—26.92—26.9226.92
1 1/438.1038.10—38.10—33.2733.27
1 1/244.4544.45—44.45—41.4041.40
255.6355.63—55.63—52.3252.32
2 1/266.5566.55—66.55—63.5063.50
381.0081.00—78.7478.7478.7478.74
4106.43106.43102.62102.62102.6297.7997.79
5131.83131.83128.27128.27128.27124.46124.46
6157.23157.23154.94154.94154.94147.32147.32
8215.90215.90205.74205.74196.85196.85196.85
10268.22268.22255.27255.27246.13246.13246.13
12317.50317.50307.35307.35292.10292.10292.10
14349.25349.25342.90342.90320.80320.80—
16400.05400.05389.89389.89374.65368.30—
18449.33449.33438.15438.15425.45425.45—
20500.13500.13488.95488.95482.60476.25—
24603.25603.25590.55590.55590.55577.85—

Inner rings are required for all PTFE-filled gaskets. Inner ring thickness 2.97–3.33 mm. Inner ring ID tolerance: 1 1/4"–3" ±0.762 mm, 4"–24" ±1.524 mm.

FAQ

Questions engineers ask us.

What is the standard thickness of a spiral wound gasket?

4.5 mm at the winding, compressed to about 3.3 mm when installed. The centering ring is about 3 mm thick.

Which standard gives spiral wound gasket dimensions?

ASME B16.20 gives the dimensions for ASME B16.5 flanges up to NPS 24 and for ASME B16.47 large diameter flanges.

Are class 300 and class 600 spiral wound gaskets the same?

No. The winding dimensions are close for many sizes, but the centering ring outside diameter differs because the bolt circles differ. Always order by class.

Can you make sizes that are not in the chart?

Yes. We make spiral wound gaskets to drawing, including large diameters and heat exchanger gaskets with pass partition bars.

Request a quote

Send your drawing.
Get a price.

Tell us the gasket type, size or drawing, material, pressure class, standard and quantity. Our engineers reply with price and delivery.

Quick enquiry

Replies go straight to our sales team.