Winding metal colour (rim of the outer ring)
The outer edge of the centering ring is painted in one solid colour for the winding metal.
| Winding metal | Colour | Max. temperature |
|---|---|---|
| SS 304 | Yellow | 650 °C |
| SS 304L | Yellow with red stripe | 650 °C |
| SS 316 / 316L | Green | 650 °C |
| SS 316Ti | Light blue | 650 °C |
| SS 347 | Blue | 650 °C |
| SS 321 | Turquoise blue | 650 °C |
| Monel 400 | Orange | 600 °C |
| Nickel 200 | Red | 600 °C |
| Titanium | Purple | 350 °C |
| Hastelloy B-2 | Brown | 450 °C |
| Hastelloy C-276 | Beige | 450 °C |
| Inconel 600 | Gold | 950 °C |
| Inconel 625 | Gold | 950 °C |
| Inconel X-750 | Light grey | 1000 °C |
| Incoloy 825 | White | 950 °C |
Filler colour (stripes on the rim)
The filler is shown by stripes painted at intervals across the same rim.
| Filler | Stripe colour | Max. temperature |
|---|---|---|
| Flexible graphite | Grey stripe | 550 °C |
| PTFE | White stripe | 260 °C |
| Non-asbestos / CAF | White / pink stripe | 350 °C |
| Ceramic | — | 650 °C |
The gasket temperature limit is the lower of the winding and filler limits. Graphite in oxidising service is normally limited further; ask us for your duty.
Reading an example
- Yellow rim, grey stripes: SS 304 winding with flexible graphite filler. The most common refinery gasket.
- Green rim, grey stripes: SS 316L winding with graphite filler.
- Green rim, white stripes: SS 316L winding with PTFE filler, for corrosive chemicals.
The gasket is also stamped with size, class, materials and ASME B16.20. If the stamp and the colour disagree, do not install it.
What about the inner and outer ring?
The colour code covers the winding and the filler only. The outer ring is normally carbon steel, painted or plated against rust, and the inner ring normally matches the winding metal. Ring materials are stamped on the gasket.
See the full range of JaySeal spiral wound gaskets, the dimension chart and CG vs CGI.




