Neoprene · EPDM · Nitrile · Viton · Silicone · Mumbai, IndiaRubber Gaskets & Seals
Cut, moulded and extruded rubber gaskets, O-rings, cords and seals in the right elastomer for water, oil, steam, chemicals and food, including single-piece moulded gaskets up to 4000 mm.
Cut, moulded or extruded.
The form depends on size, quantity and how the seal has to fit.
Cut gaskets
Ring and full face gaskets cut from rubber sheet, plain or fabric inserted.
Flanges & covers
Moulded rings & seals
Moulded gaskets, seals and profiles, including single-piece rings up to 4000 mm.
No jointsO-rings & cords
O-rings in standard and special sizes, and cord for vulcanised rings.
Grooves & glands
Strips & profiles
Extruded strip, cord and profiles for doors, hatches and large frames.
Any lengthThe right rubber for the fluid.
Most rubber gasket failures are the wrong elastomer, not the wrong size. Tell us the fluid and temperature and we will match the compound.
Elastomer
Typical service and temperature
Also available
For special service
Seals too. Wiper and scraper seals, O-rings and custom moulded parts alongside flange gaskets.
Moulded, cut and coiled.
Real rubber gaskets and seals from our works.
See all photos in our gasket gallery →
Big, joint-free, to drawing.
Rubber gaskets that standard stockists do not carry.
Up to 4000 mm one piece
Single-piece moulded rings for large flanges and equipment, with no joint to leak.
Strip for big frames
Extruded strip and profile cut to length for doors, hatches and large frames.
Food & pharma grade
Silicone and EPDM gaskets for clean process lines and equipment.
Specifications
- Forms
- Cut gaskets, moulded rings and seals, O-rings, cord, strip, profiles
- Elastomers
- Neoprene, EPDM, Nitrile, Viton, Silicone, natural rubber, PU
- Size
- Small seals to single-piece moulded gaskets up to 4000 mm
- Shapes
- Ring, full face, oval, rectangular, to drawing
- Hardness
- Typically 50 to 80 Shore A; to specification
- Reinforcement
- Plain or fabric inserted
- Standards
- ASME B16.21, DIN, IS, or to drawing
- Grades
- Industrial and food grade compounds
- Inspection
- Third-party inspection by LR, BV, TÜV, SGS and others
gasket vendor
Used in plants across India and the Gulf
Rubber gaskets, answered.
Which rubber is best for my gasket?
It depends on the fluid and temperature. EPDM suits hot water and steam, Nitrile suits oils and fuels, Viton suits aggressive chemicals and hot oil, Silicone suits food and high heat, and Neoprene is a good general weather and water rubber.
Can you make large rubber gaskets without a joint?
Yes. We make single-piece moulded rubber gaskets up to 4000 mm diameter, so there is no glued or vulcanised joint to fail.
Do you make O-rings and seals as well as gaskets?
Yes. O-rings, cord, wiper and scraper seals and custom moulded parts in standard and special sizes.
Are food grade rubber gaskets available?
Yes, in food grade Silicone and EPDM compounds for food, beverage and pharma equipment.
What do you need to quote rubber gaskets?
Size or drawing, rubber type or the fluid and temperature, hardness, thickness or cross-section, and quantity.
Send your drawing.
Get a price.
Tell us the gasket type, size or drawing, material, pressure class, standard and quantity. Our engineers reply with price and delivery.
Quick enquiry
Replies go straight to our sales team.